Anker A3944 Faqs

Category Questions
How do I power the earbuds on
and off?
Can I manually turn either side of
the earbud on or off?
How do I avoid triggering the
touchpad by accident when
adjusting the earbuds in my ears?
Why is the touch control not
responsive at times?
Can I use the left or right earbud
Operation on its own?
why i can't tell the difference of
3eq modes
How do I activate voice assistants like Siri?
How do I switch between
different EQ modes?
How should I look after Life P2
Mini?
How do I connect Life P2 Mini if
I'm using it the first time?
FAQs for A3944
Answers
Power on: Please remove the protective film covering the connectors on the earbuds
and place them back on the charging case to power on.
- The earbuds will turn on automatically when you open the lid of the charging case.
Power off:
- Put the earbuds back into the charging case and close the lid to turn off the
earbuds.
- The earbuds will also turn off automatically when placed outside the case and have
been disconnected from your device for 10 minutes.
Yes, you can manually turn the individual earbuds on or off by long tapping for 8
seconds to turn off the earbud, or long tapping for 3 seconds to turn on the earbud.
Avoid touching the area near the logo.
1. Please make sure you are tapping the right spot on Life P2 Mini (where the logo is
printed).
2. Please make sure each tap is in the right spot within 1 second when you double or
triple tap.
Yes, just take one earbud out from the charging case to use.
If you are using two earbuds, you can put either one of the earbuds back into the
charging case and continue using the other one on its own.
1. maker sure you switch the eq mode successful, triple tap the right ear buds and
hear a "di" sound
2. if your original music don't have bass, the eq won't tell much difference, depends
on your music.
3. maker sure you are using 2 earbuds, 3 eq modes don't work for single ear bud.
Triple tap the Left earbud to activate when using both earbuds. And when using a
single bud, triple tap the bud to activate.
Triple tap the right earbud to switch between Signature mode, Bass Booster mode,
and Podcast mode ， you will hear a tone for each successful switch. The switching
of EQ modes only work when in stereo mode. (When paired with a new device, the
earbuds will be in default mode — Signature Mode.
1) Use the earbuds regularly to avoid over-discharge which can harm the lifespan of
the earbuds' battery. We recommend using Life P2 Mini at least once a month.
2) Charge the earbuds after you use them. In order to improve the battery's lifespan,
do not always wait until there's 20% power remaining or less to charge them.
3) If you intend to store the charging case, make sure there are at least 2 indicators
that light up on the case to ensure there is enough power.
4) Open the lid of the charging case at least once a month to ensure the earbuds are
still working.
5) Regularly clean the charging pins on the earbuds and charging case.
6) Keep the ear tips clean.
7) If Life P2 Mini comes into contact with liquid, use a hairdryer on the 'cool' setting to
dry the case.
Step 1: Please make sure you remove the protective film from the earbuds when
you're using it for the first time.
Step 2: Put the earbuds back in the charging case and close the lid to power on the
earbuds.
Step 3: Open the lid of the charging case and the LEDs will flash white in sequence
continuously. (You don't have to take out your earbuds)