Fuel And Oil Systems; Fuel Filter; Oil Filters And Oil Reservoir; Air Silencer - BRP EVINRUDE E-TEC 200 Service Manual

FUEL AND OIL SYSTEMS

Routine replacement of fi lters reduces the possi-
bility of f oreign mate rial restricting the incoming
fuel or oil supplies.
Replacement filter elements are available through
Evinrude/Johnson Genuine Parts.

Fuel Filter

Evinrude E-TEC V-model outboards are equipped
with a water-sensing, water-se parating fuel filter .
Refer to FUEL COMPONENT SER VICING on
p. 143.
1. Water-separating fuel filter

Oil Filters and Oil Reservoir

Perform visual inspections to identify oiling system
leaks. Make certain the oil t ank is filled a nd oil
supply is not contaminated.
Serviceable oil filters are locate d in th e oil inje c-
tion tank, and in the oil supply line before the oil lift
pump(s).
1
1. Filter, oil supply line
2. Filter, oil injection tank

Air Silencer

The air silencer on Evinrude outboards maximizes
air flow while minimizing noise.
Routine cleaning of the air silence r is recom-
mended to remove any accumulation of debris.
1

Hoses and Connections

Check cond ition of all hoses and con nections in
both the fuel and oil systems:
•
Visually inspect all components.
•
Observe all clamp s, hoses, a nd co nnections
005022
while outboard is running.
•
Replace all damaged components.
•
Repair all leaks.
Failure to check for fue l lea kage could
allow a leak to go undetec ted, resulting in
fire or explosion.
2
004250
42785
.ROUTINE SERVICE
FUEL AND OIL SYSTEMS
A
WARNING
2
004218
41