Oil Supply Priming; Oil Hose Priming; Oil Pump Priming - BRP EVINRUDE E-TEC 200 Service Manual

OILING SYSTEM

OIL SUPPLY PRIMING

OIL SUPPLY PRIMING
A
WARNING
Always use c aution while wo rking around
machinery with m oving p arts. The follow-
ing set-u p proce dures requ ire running
tests that are performed
board's motor cover removed.

Oil Hose Priming

Insert the oil supply hose from the oil tank into a
suitable co ntainer. Squeeze the oil primer bu lb
until oil flows from the oil tank into the container.
Once oil supply hose from the oil tank is filled with
oil, conne ct t he ho se to the oil su pply fit ting on
outboard and secure with Oetiker clamp.

Oil Pump Priming

Squeeze the oil primer bulb until oil flows from the
oil supply hose, through the oil f ilter, and into the
crankcase oil pump (front oil pump).
IMPORTANT:
Inspect oil filter to make sure it is
filled with oil. All air must be eliminated from the oil
filter during priming procedure.
Continue to sq ueeze the oil primer bulb until oil
flows through the front oil pump, into the oil distri-
bution hoses, and to the crankcase fittings.
Use Evinrude Diagnostics software to m ake sure
the EMM is pro grammed for the type of oil being
used.
170
250 – 300 HP (3.4 L) M
Start the outboard. Use the oil priming functions in
the sof tware to m ake sure t he sy stem is com -
pletely primed.
IMPORTANT:
during th e priming proce dure to avo id pumpin g
too much o il into the crankcase, which
with the ou t-
cause a hard-starting condition.
Prime the rear oil pump FIRST (cylinder oil pump).
Use the
Dynamic Test screen to prime the rear oil pump.
Dynamic Tests Screen
1. Prime Cylinder Oiler button
With the Prime Cylinder Oiler function activate d,
continue t o squeeze the oil primer bulb un til oil
flows through the oil distribution hoses of the rear
oil pump.
be used along with the primer bulb for two rea-
sons:
•
The outbo ard sho uld be running
Prime Cylinder Oiler button o f t he
The software priming function must
NOTICE
The primer bul b alone wi ll not move oil
through the rear pump assem bly unless the
pump is running.
ODELS
could
008570
1