Configuring The Network Setting - Ricoh M 320 Setup Manual

2. Configuring the Network Setting

Check How the Computer Is Connected
Specify how to connect to your computer according to the communication environment of your system.
The wireless LAN (Wi-Fi) connection is available when you attach a wireless LAN option to the USB port on the back of the machine.
Yes
No
Does the access point have
a WPS button?
Connect by the WPS button
Go to page 10 "Easy Setup Using the WPS Button".
Connect by the PIN code
Go to page 12 "Easy Setup Using a PIN Code".
• To set up manually, see User's Guide in our website.
• When the Wi-Fi Direct function is enabled, a Wi-Fi Direct compliant device is recognized as a router (access point), and direct
communication among Wi-Fi Direct-compliant devices becomes possible.
When communicating using the Wi-Fi Direct function, you cannot connect to the Internet at the same time.
■ Attaching the wireless LAN option
Turn off the machine, and then insert the wireless LAN option into the USB port on the back of the machine.
If a screen asking you to select Wi-Fi or Ethernet is displayed, select [Wi-Fi].
6
Which method do you want to use (wireless or wired)?
Wireless
Use a router (access point)?
Connect via Wi-Fi Direct
See Wi-Fi Direct Guide in our website.
Connect using a
USB cable
Go to page 15 "Connecting the Machine via USB or
Ethernet".
Can you identify the PIN code
of the router (access point)
to which you want to connect?
Connect by Wi-Fi Setup Wizard
Go to page 8 "Easy Setup Using the Wi-Fi Setup Wizard".
M0ESIC0005
Wired
Connect using an
Ethernet cable
M0ENIC0007