Arnav Systems, Inc - Trans-Cal SSD120-N-RS5 Owners & Installation Manual

6.4 ARNAV Systems, Inc.

SSD120-(XX)N-RS5 Software Configuration Note for Use with ARNAV Devices
The SSD120-(XX)N-RS5 must be software configured per §4.6 to operate with ARNAV system devices.
Ensure that all hardware jumpers are removed from the serial data connector. Hardware jumpers on the
Serial Data Receptacle (DA-15S) will override any software settings.
ARNAV Systems 5000 Series Multi-Function Display
ARNAV
5000
25 Pin Connector
15
13 or 25
ARNAV Systems GPS-505/506/512 GPS Sensor
ARNAV
GPS-505/506/512
DB-25 Connector
8
9
ARNAV Systems DR-100 WxLink Receiver/ Multiplexer
ARNAV
DR-100
25 Pin Connector
10
13 or 25
SSD120-(XX)N-RS5
Serial Data Receptacle
6, 8, 12, 14, 15 (choose one)
1, 4, 5, 7, 11, 13 (choose one)
Protocol, Software select
ARNAV protocol see §4.6.
SSD120-(XX)N-RS5
Serial Data Receptacle
6, 8, 12, 14, 15 (choose one)
1, 4, 5, 7, 11, 13 (choose one)
Protocol, Software select
ARNAV protocol see §4.6.
SSD120-(XX)N-RS5
Serial Data Receptacle
6, 8, 12, 14, 15 (choose one)
1, 4, 5, 7, 11, 13 (choose one)
Protocol, Software select
ARNAV protocol see §4.6.
42