Garmin International - Trans-Cal SSD120-N-RS5 Owners & Installation Manual

6.3 Garmin International

Garmin 400 and 500 Series GPS Devices (Includes 430W and 530W)
To allow the Garmin 400 series GPS to communicate with the SSD120-(XX)N-RS5 go to the Main
RS232 Config page and set channel 1 input to Icarus-alt.
GNC 300
37 Pin Connector
J101
17
26 or 22
To allow the Garmin 300 series GPS/Comm to communicate with the SSD120-(XX)N-RS5 go to the I/O
Test Page and set channel 1 input to Icarus-alt.
Garmin
78 Pin Conn.
(P4001)
6, 8, 12, 14, 15 (choose one)
57
1, 4, 5, 7, 11, 13 (choose one)
77 or 78
Garmin 400 series GPS software configuration
Garmin GNC 300 GPS/Comm
Function
RxD to TxD
Data Ground
SSD120-(XX)N-RS5
Serial Data Receptacle
Protocol, jumper pin 7 to
ground.
Optional, jumper pin 2 to
ground for 10' resolution.
15 Pin Serial Data Receptacle
Optional, jumper pin 2 to ground
41
SSD120-(XX)N-RS232
6, 8, 12, 14, 15 (choose one)
1, 4, 5, 7, 11, 13 (choose one)
Protocol: connect pin 10 to
ground.
for 10' resolution.