Table of Contents
Advertisement
Section 6.0 GPS/MFD & Miscellaneous Connection Data
Given the speed with which new GPS and MFD units are entering the market, it is impossible to provide data on
every device. The following digitizer/GPS interconnections are provided as a quick reference only, and though they
are correct to the best of our knowledge, always consult the latest installation, operation, and service bulletins from
the GPS or MFD manufacturer.
6.1 UPS Aviation Technologies (IIMorrow)
Apollo GX50, GX60,
Signal
Ground
In test mode, rotate the Large knob to select serial port configuration RX.
Press SEL, rotate the large knob to select the RxD2 port, rotate the small knob to select AltEnc input.
Apollo MX20
Apollo Model GX50, GX60, GX65
GX65
RxD2
Apollo GX50, GX60, GX65 Software Configuration
Apollo Model MX20 Multi Function Display
Signal
RxD2
Ground
Apollo MX20 Software Configuration
Under External Data Source set altitude source to Port 2.
Apollo
37 Pin D-Sub
Connector
21
20
Optional, jumper pin 2 to ground for
Apollo
37 Pin D-Sub
Connector
21
3
Page 39 of 57
SSD120-(XX)N-RS5
Serial Data D-Sub Receptacle
6, 8, 12, 14, 15 (choose one)
1, 4, 5, 7, 11, 13 (choose one)
10' resolution.
SSD120-(XX)N-RS5
Serial Data D-Sub Receptacle
6, 8, 12, 14, 15 (choose one)
1, 4, 5, 7, 11, 13 (choose one)
Optional, jumper pin 2 to ground
for 10' resolution.
Advertisement
Table of Contents
