Adjusting Armrests; Additional Precautions; Maintenance - Drive PreserveTech RTL12C003-WH Assembly Instructions Manual

Before use, adjust height of each armrest to your spe-
cific needs, making sure each arms is set at the same
height. When desired height is reached, lock arms into
place by aligning push pins into holes. Push pins will
click into place when secure.

additional precautions

• Inspect all parts for shipping damage before assembly.
If there is shipping damage - DO NOT USE. Contact
dealer/carrier for further instructions.
• Check for secure fit routinely before using product.
User's weight should be centered over toilet seat, not
too far forward or too far to one side, as unit may tip.
• Use the arm supports only for assistance. DO NOT
attempt to use the arms to support full body weight.
Drive recommends periodic visual inspection of this
product by the user, to ensure that all parts and hard-
ware are secure, that components are in good working
order and not worn, torn, frayed, loose, or rusted and
that there are no obstructions or impediments to normal,
safe operation. If any part or mechanism appears to be
unsafe or compromised, do not use the product. If you
experience problems, please contact the provider that
sold you the product or visit www.drivemedical.com/help
for more info.
NOTE: To maintain the beauty of the original finish, clean
with mild soap and rinse with warm water. Wipe bath
seat dry after each use.

adjusting armrests

maintenance