CUB CRAFTERS
CC11-100
•
Seat Belts ........................................... Check fastened
•
Brakes ........................................................... Release
•
Circuit Breakers (wing root) ........................... Check in
•
Circuit Breakers (seat base) .......................... Check in
•
Circuit Breakers (instrument panel) ............... Check in
•
Doors and windows ......................................... Closed
•
Landing Lights (if required) ..................................... On
* When operating at high altitudes and/or temperatures, it
may be necessary to lean the mixture for peak rpm.
4.3.3.2 Takeoff
Accelerate to 52 mph or 45 knots IAS (depending on
aircraft weight) allowing tail to rise; maintain directional
control.
Control stick ....................................... Gentle back pressure
Accelerate to desired climb speed
Flaps ......................................................................... Retract
Landing Lights (if required) ............................................. Off
4.3.3.3 Climb
INDICATED AIRSPEED (IAS)
•
Best Rate
•
Best Angle
•
Mixture ............................ Lean to obtain maximum rpm
•
Carburetor Heat .......................................... As required
4.3.3.4 Cruise
•
Power ................................................................. Adjust
•
Mixture ................................................................ Adjust
•
Carburetor Heat .......................................... As required
4.3.3.5 Descent
•
Power ................................................................. Adjust
Issued: 08/01/06
Date of Revision: 11/23/18
NORMAL PROCEDURES
MPH
71
50
REPORT SC10000AFM
Page Number 4-11
SECTION 4
KNOTS
62
43