Fuel Selector; Seat Belts; Startup And Taxi; Before Starting Engine - Cub Crafters CC11-100 Pilot Operating Handbook

SECTION 4
NORMAL PROCEDURES
4.3.2

STARTUP AND TAXI

4.3.2.1 Before Starting Engine

• Preflight Inspection ......................................... Complete
• Seat Belts ........................................................ Fastened
• Passenger Briefing ......................................... Complete
• Parking Brakes (on master cylinders) .. Both wheels, set
• Door ................................................. Closed and latched
• Fuel Selector .......................................................... Both
• Avionics Master Switch .............................................. Off
• Propeller Area ........................................................ Clear
The parking brake on each main wheel is set by
depressing the top of each rudder pedal and rotating the
valve on each master cylinder so the lever is oriented
horizontally while maintaining pressure on the pedal. To
release the brakes, rotate both valves so the levers are
oriented vertically. Do not close the valves without any
pressure applied to the pedals, as this will not apply the
brakes and will allow the aircraft to be moved while the
brakes are rendered inoperative for ground operations.
REPORT SC10000AFM
Page Number: 4-8
CAUTION
Date of Revision: 11/23/18
CUB CRAFTERS
CC11-100
Issued: 08/01/06