SECTION 4
NORMAL PROCEDURES
4.3.1.4 Empennage
• Bracing Wires and Attach Brackets . Check for tension
• Hinges ............................................................... Check
• Rudder Cables ................................................... Check
• Beacon and Position Light (if installed) ............. Check
• Control Surfaces ................................................ Check
• Tailwheel and Springs ....................................... Check
• Tie Down ....................................................... Remove
REPORT SC10000AFM
Page Number: 4-6
CUB CRAFTERS
Issued: 08/01/06
Date of Revision: 11/23/18
CC11-100