Cub Crafters CC11-100 Pilot Operating Handbook page 221

CUB CRAFTERS SECTION 9
CC11-100 SUPPLEMENTS- TWO-SWITCH
ELEVATOR TRIM SYSTEM
The switch should normally be kept in the FRONT
position to avoid inadvertent operation by an occupant in
the aft seat.
Similarly, if the switch is in the REAR position, operation
by the aft occupant will take priority over operation by the
forward occupant. The REAR position will normally be
used during flight instruction.
If the selector switch is turned to the OFF position,
neither occupant will be able to operate the elevator trim.
Issued: 03/13/12 REPORT SSC100000AFM
Date of revision: N/A Page number 9-5-7