Cub Crafters CC11-100 Pilot Operating Handbook page 196

SECTION 9.2
SUPPLEMENT- SINGLE PLACE CONVERSION
For Two Place Operation:

Rear seat must be installed.

Single Seat Placard must be removed

Maximum empty weight per Section 9.2.2.2.
9.2.2.2 EMPTY WEIGHT INFORMATION
The maximum empty weights as defined by ASTM and
FAA regulations are as shown in the table below. The
aircraft must always comply with the weights shown
below.
Wheels/Skis
Wheels/Skis
Floats
Floats
Table 9-2-1 - Maximum Empty Weights
9.2.2.3 PLACARDS
This placard is designed to be fixed using "Velcro" and
must be present when equipped for single place
operation. This placard must be removed for dual place
operation.
instrument panel or on the overhead tube near the
compass correction card.
Figure 9.2.1 - Single Seat Placard
REPORT SC10000AFM
Page Number: 9-2-4
Max Empty Weight
(CC340 Engine)
900 lbs
1090 lbs
1010 lbs
1200 lbs
The placard may be installed on the
CUB CRAFTERS
Configuration
Two Place
Single Place
Two Place
Single Place
Issued: 04/15/09
Date of Revision: 10/31/11
CC11-100