Cub Crafters CC11-100 Pilot Operating Handbook page 186

SECTION 9.1
SUPPLEMENT-FLOATS
9.1.6.4.15 Cruise

Power .................................................................. Adjust

Mixture ................................................................ Adjust

Carburetor Heat ........................... Cold, use as required
9.1.6.4.16 Descent

Power .................................................................. Adjust

Mixture ............................................ Richen as required

Carburetor Heat .......................................... As required
9.1.6.4.17 Approach

Fuel Selector ......................................................... Both

Seat Belts ....................................................... Fastened

Mixture .................................................................... Set

Flaps ....................................................................... Set
INDICATED AIRSPEED (IAS)
Maximum speed first notch flaps (15°)
Maximum speed (>15°)

Trim ............................................................ As required

Speed ......................................................... As required
(1.3 full flaps stall speed at gross weight is 42 mph or
37 knots IAS)
9.1.6.4.18 Landing

Water Rudders ............................................... Check up

Landing Gear (Amphibious Only) ............... Up for Water

Control Stick ............................... Hold full aft as aircraft
REPORT SC10000AFM
Page Number: 9-1-18
CUB CRAFTERS
MPH
Down for Land
decelerates to taxi speed
Issued: 04/15/09
Date of Revision: 04/09/13
CC11-100
KNOTS
85 74
81 70