Cub Crafters CC11-100 Pilot Operating Handbook page 154

SECTION 7 CUB CRAFTERS
AIRCRAFT AND SYSTEMS CC11-100
The aircraft seats two in a tandem configuration. All flight
controls are within reach of the forward occupant, and
therefore, the aircraft must be flown from this position.
The aft occupant is provided with a control stick, rudder
pedals, throttle and brakes for flight instruction.
The forward seat is adjustable fore and aft. To move the
seat, remove the quick-release pins on the sides of the
seat and slide to the desired position.
The rear seat straps should be checked for proper routing
through the slide adjuster as shown below.
CAUTION
Ensure that the seat is secure prior to takeoff.
Figure 5 - Rear Seat Strap Routing
REPORT SC10000AFM
Issued: 08/01/06
Page Number: 7-12 Date of Revision: 11/23/18