Adjusting The Volume; Changing The Hearing Program - Miracle-Ear GENIUS3.0 User Manual

Removing a hearing aid:
Lift the hearing aid and slide
X
it over the top of your ear
If your hearing aid is
X
equipped with a custom shell
or a Click Mold, remove it
by pulling the small removal
cord toward the back of your
head.
For all other ear pieces: Grip the receiver in the
X
ear canal with two fingers and pull it carefully out
Do not pull the receiver cable.
CAUTION
Risk of injury!
In very rare cases the ear piece could remain
X
in your ear when removing the hearing aid. If
this happens, have the ear piece removed by a
medical professional.
Clean and dry your hearing aids after usage. Read more
in section "Maintenance and care."
18
➊
.
➋
.

Adjusting the volume

Your hearing aids automatically adjust the volume to
your listening situation.
If you prefer manual volume adjustment, press the
X
rocker switch.
Refer to section "Controls" for the setting of the
rocker switch.
An optional signal tone can indicate the volume
change. Once the maximum or minimum volume has
been reached, you may hear an optional signal tone.

Changing the hearing program

Depending on the listening situation, your hearing aids
automatically adjust their sound.
Your hearing aids may also have several hearing
programs which allow you to change the sound, if
needed. An optional signal tone can indicate the
program change.
To change the hearing program, press the
X
rocker switch.
Refer to section "Controls" for the setting of the
rocker switch. Refer to section "Hearing programs"
for a list of your hearing programs.
19