Immergas HERCULES Condensing 26 2 E Manual page 54

Technical Documentation
Information menu M1 (INFO). This menu contains the
various information relative to boiler operations:
1st
Button 2nd Level
Level
P11
(SOFTWARE)
P12
(HEAT.TIME)
P13
(IGNIT.NR)
P14
(OUTSIDET.)
(with optionall
external probe
present)
--
D 
(NO EXT.P.)
(without optional
 C
external probe
present)
P15
(DHW FLOW)
P17
(FANSPEED)
P18
(PUMPSPEED)
P19
(FAILURE)
Customisations menu M3 (PERS.MENU). AThis menu
contains all operating options that can be customised. (The
first entry of the various options that appears within the para-
meter is that selected by default).
1st
Button 2nd Level
Level
P31
(DISPLAY)
P32
 (DISP.
D
DATA)

C
P33
(EMER-
GENCY)
RESET
(RESET
ALL)
STHCkW ed 0409
Button 3rd Level Button
D 
 C
P14/A
(CURRENT)
P14/B
(OUT T .MIN)
D 
P14/C
(OUT T .MAX)
 C
RESET selection
 C
D 
 C
Button 3rd Level Button
(LIGHT)
AUTO
D
(Default)
 x
D
selection
(LIGHT) ON

C

(LIGHT) OFF
D
P32/A
(DISP.DESC.)


D

C
D
P32/B
(LANGUAGE)

OFF D
 (EMERG.) x
D
selection
ON

C
(EMERG.)

D
x
selection

C
Displays the management software version of the circuit board installed
in the boiler
Displays the total operating hours of the boiler
Displays the number of burner ignitions
Displays the current external temperature (if external probe is present
Optional)
Displays the minimum external temperature recorded (if external probe is
present Optional)
Displays the maximum external temperature recorded (if external probe is
present Optional)
D
x
By pressing button"D" the MIN and MAX temperatures measured are
reset
No display for this model
Displays the speed in instantaneous revs of the fan
The value displayed does not affect this model
Displays the last 5 events that have caused the boiler to shutdown
The sequential number from 1 to 5 along with the relative error code
By pressing button "D" repeatedly, it is possible to display opeating times
and the number of ignitions where the anomaly took place
4th Level Button
C
P32/A.1
 (CH.TEMP.)
(Default)
D
C P32/A.2 x
(OUTSIDET.) selection
ITALIAN


C
(Default)
A1
C
(ALPHANUM)
C
52
Technical Documentation
Description
Description
The display lights up when the burner is
on and when the controls are accessed.
It remains on for 5 seconds after the last
operation performed
The display is always lit
The display only lights up when the
controls are accessed and remains on for 5
seconds after the last operation performed
The indicator displays the output
temperature from the primary heat
exchanger
The indicator displays the current external
temperature (with external probe Optional)
All descriptions are given in Italian
All descriptions are given in Alphanumeric
mode
By activating this function in winter mode,
the room heating function can be activated
even if the Remote Control or TA are out
of order
By pressing button "D" the customisations
made are reset, restoring the values set in
the factory
HERCULES Condensing Export