Table of Contents
Advertisement
HMT130 User Guide
2.3 Fixed and remote probe models
The transmitter is available either with a fixed probe directly attached to the transmitter
housing or a remote probe with different (3/5/10/20 m (10/16/33/66 ft)) cable lengths. All
extension cables can be easily cascaded in order to obtain longer reach.
More information
‣ Spare parts and accessories (page 73)
2.4 Optional display
The transmitter is also available with an optional graphical 128×64 pixel resolution LCD display.
The display shows the measurement results of selected parameters in selected units (metric or
non-metric, defined when ordering the transmitter). The parameters are displayed
simultaneously on two separate rows on the display.
More information
‣ Transmitter parts (page 11)
2.5 Interchangeable probe
The probes used in the transmitter are fully interchangeable. You can easily remove the probe
and replace it with a new one without having to adjust the transmitter. You have the following
options when purchasing a new probe from Vaisala:
• Order a new probe and keep your current one.
• Order a new probe and return the old one to Vaisala (replacement probe).
Only probes that have a compatible digital output (VDIGI mode) can be used with
the transmitter. Compatible probes have the letter "V" as the first letter in their
order code. The order code is written on the probe.
More information
‣ Removing and fastening fixed probe (page 55)
‣ Removing and fastening remote probe (page 56)
‣ Technical support (page 85)
10
M211280EN-D
Advertisement
Table of Contents
