Page 2
1. Connect the microphone to your PC via the provided USB-C to USB-C cable or USB-C to USB-A cable. 2. Connect to your headphones via a 3.5mm audio cable. You might need to manually select PowerCast M300 for your PC system. • macOS System Preferences > Sound > Input •...
Page 3
Light Show Press the RGB button on the bottom of the microphone to switch light effects. To turn off the light effects, press and hold the RGB button for 2 seconds. Adjusting the volume dial corresponds to the brightness of the light effects in the middle of the microphone.
Page 4
Microphone on Press once Solid blue Microphone off Press once Solid red Switch to microphone control Press and hold for 2 Solid blue status seconds Rotate in microphone Solid blue; brightness Microphone volume up / down control status varying with volume Switch to headphone control Press and hold for 2 Solid green...