Immergas SUPER TRIO TOP Instructions Booklet And Warnings page 66

1.12 ROOM CHRONO-THERMOSTATS AND
REMOTE CONTROLS (OPTIONAL).
See the Internal Unit instruction booklet.
1.13 SOLAR CONTROL UNIT INSTALLATION
(OPTIONAL).
If necessary, it is possible to remove the contact cover, by undoing
the relevant fixing screw (Fig. 24) and access the connections area
(Fig. 25).
Description of the solar control unit controls.
1: The solar power storage tank is in operation.
2: Simplified system drawing.
- The pump logos switch on when they are activated.
- The solid triangles on the valve logo indicate circulation.
- The inside of the tank is active during filling.
3: Operating mode setting.
4: Name of the value or parameter displayed under number "5".
5: Temperature of the various sensors or value of the parameter
displayed under number "4".
A: Keypad description:
Plus key (▶+);
Minus key (-◀);
Confirmation key or menu navigation key (OK).
N.B.: on the main screen you can select the sensor that must always
be displayed; press the (OK) key to display the desired sensor.
Installation menu.
Press the (OK) key for 5 seconds to access the installation menu.
When you access the installation menu (the first parameter "Syst"
is displayed), it is possible to select another parameter by pressing
the (OK) navigation key.
Once the desired parameter is displayed, it is possible to change
the value using the keys (▶+) or (-◀).
66
8
7
6
Key:
A Control Unit;
1 Tank 1 sensor (T2) NTC 10k (105°C, 3M);
2 Manifold 1 sensor (T1) PT1000 (180°C, 1.5M);
3 Extra sensor for manifold 2 - (T4) PT1000 (180°C);
4 Extra sensor (T3) NTC 10k (105°C, 3M);
5 Power supply (230 Vac ± 10% - 50Hz);
6 Solar pump (P1);
7 Extra pump or valve (P2);
8 Extra pump or valve (P3) (dry contacts).
2
1
A
5
24
1
2
3
4
25
26