Immergas SUPER TRIO TOP Instructions Booklet And Warnings page 57

Magis Pro 12-14-16 V2 internal Unit installation operations
• Tighten the bracket (H) to the special upper cross member with
screws (F).
• Hang the Internal Unit (G) on the bracket (H) installed previously,
(Fig. 11).
• Make the hydraulic connection between the storage tank unit
(a), single zone hydronic unit (c) and Magis Pro 12-14-16 V2
Internal Unit (G), as shown in Fig. 12 and 13.
151
F
G
Perform the connections in sequence, starting from the pipes
near the rear wall up to those near the installer, remembering
to insert the special gaskets supplied.
N.B. (Fig. 13): remove the grid from the Magis Pro 12-14-16 V2
Internal Unit and connect the shut-off valves on the return of the
same to the relative pipe in the accessory kit.
H
16
15
F
16
1
2
G
Key:
1 - Supplied in the kit
2 - Present in Magis Pro 12-14-16 V2
11
12
57