Immergas SUPER TRIO TOP Instructions Booklet And Warnings page 49

I
1
NSTALLATION
1.1 DESCRIPTION OF THE DEVICE.
The Super Trio Top pack described below allows you to install in a
special recessed frame called "Container Super Trio" (not included
in the supply) a hydronic unit designed to be coupled with the
Magis Pro 12-14-16 V2 models (excluded from this supply), able
to meet the winter central heating / C.H., summer cooling needs,
as well as the production of domestic hot water, possibly with solar
integration (via special optional kit).
1.2 INSTALLATION RECOMMENDATIONS.
The pack has been designed solely for wall installation using the
special " Container Super Trio" (recessed frame).
The place of installation of the appliance and relative Immergas
accessories must have suitable features (technical and structur-
al), such as to allow for (always in safe, efficient and comfortable
conditions):
- installation (according to the provisions of technical legislation
and technical regulations);
- maintenance operations (including scheduled, periodic, routine
and special maintenance);
- removal (outdoors in the place for loading and transporting the
appliances and components) as well as their eventual replacement
with appliances and/or equivalent components.
Only a professionally qualified heating/plumbing technician is
authorised to install the pack.
Installation must be carried out according to regulation standards,
current legislation and in compliance with local technical regula-
tions and the required technical procedures. Before installing the
pack, ensure that it is delivered in perfect condition; if in doubt,
contact the supplier immediately. Packing materials (staples, nails,
plastic bags, polystyrene foam, etc.) constitute a hazard and must
be kept out of the reach of children. Keep all flammable objects
away from the appliance (paper, rags, plastic, polystyrene, etc.).
1.3 PACKAGING.
In the event of malfunctions, faults or incorrect operation, turn
the device off immediately and contact an authorised company
(e.g. the Immergas Technical Assistance Centre, which has spe-
cifically trained staff and original spare parts). Do not attempt to
modify or repair the appliance alone. Failure to comply with the
above implies personal responsibility and invalidates the warranty.
• Installation Standards: this pack must be installed inside an
external wall using the special "Container Super Trio" and se-
curing it with the support brackets supplied together with the
pack itself. It was not designed to be installed on plinths or floors
and without the special recessed frame.
Attention: installation of the "Container Super Trio" in the wall
must ensure a stable and efficient support of the pack. The kit
ensures appropriate support only if installed correctly (accord-
ing to the rules of good practice), following the instructions
on its instructions leaflet. The "Container Super Trio" for pack
is not a supporting structure and cannot replace the piece of
wall removed. It is therefore necessary to check correct po-
sitioning inside the wall. For safety reasons against any leaks
it is necessary to plaster the pack housing in the brick wall.
This pack is used to heat water to below boiling temperature in
atmospheric pressure. It must be connected to a central heating
system and domestic hot water circuit suited to its performance
and capacity.
"Anti-legionella" heat treatment of the Immergas storage
tank unit (activated by the specific function present on the
predisposed thermoregulation systems): during this stage, the
temperature of the water inside the storage tank exceeds 60°C with
a relative risk of burns. Keep this domestic hot water treatment
under control (and inform the users) to prevent unforeseeable
damage to people, animals, things.
1
49