State Water Heaters 100 Series Instruction Manual page 18

restore factory defaults
actIon dIsplay
From the Main Menu use the Up/Down buttons to select (highlight in black)
the "Restore Factory Defaults" menu.
Press the Operational Button underneath "SELECT." The Restore Factory
Defaults menu will be displayed.
From the Restore Factory Defaults menu press the Operational Button
underneath "YES." The display will show text confirming the factory default
settings have been restored.
Press the Operational Button underneath "BACK" to exit the Restore Factory
Defaults menu.
the followInG paGes are for InstallatIon, serVIce/
MaIntenance and trouBleshootInG.
these InstructIons are to Be used and perforMed By a
QuAlIFIeD INStAller or ServIce AgeNcy oNly.
18