NETGEAR R6900v2 User Manual page 86

Nighthawk AC1900 Smart WiFi Router Model R6900v2
To configure WPA and WPA2 enterprise security:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Network page displays.
Note If you are configuring a guest network, select Guest Network instead. The Guest
Network Settings page displays.
5. In the Security Options section below either the Wireless Network (2.4GHz b/g/n) section or the Wireless
Network (5GHz a/n/ac) section, select the WPA/WPA2 Enterprise radio button.
6. In the WPA/WPA2 Enterprise section, enter the settings as described in the following table.
Field
Encryption Mode
Group Key Update Interval
RADIUS server IP Address
Description
From the Encryption Mode menu, select the enterprise mode:
• WPA [TKIP] +WPA2 [AES]. This type of security enables WiFi devices
that support either WPA or WPA2 to join the router's WiFi network. This
is the default mode.
• WPA2 [AES]. WPA2 provides a secure connection but some older WiFi
devices do not detect WPA2 and support only WPA. If your network
includes such older devices, select WPA [TKIP] + WPA2 [AES] security.
Enter the interval in seconds after which the RADIUS group key is updated.
The default interval is 3600 seconds.
Enter the IPv4 address of the RADIUS server to which the WiFi network can
connect.
Manage the Basic WiFi Network Settings
86