Change A Port Forwarding Rule - NETGEAR R6900v2 User Manual

Nighthawk AC1900 Smart WiFi Router Model R6900v2
8. Specify a new port forwarding rule with a custom service or application as described in the following
table.
Field
Service Name
Service Type
External port range
Internal port range
Internal IP address
9. Click the Apply button.
Your settings are saved. The rule is added to the table on the Port Forwarding / Port Triggering page.

Change a Port Forwarding Rule

You can change an existing port forwarding rule.
To change a port forwarding rule:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
Description
Enter the name of the custom service or application.
Select the protocol (TCP or UDP) that is associated with the service or application.
If you are unsure, select TCP/UDP.
If the service or application uses a single port, enter the port number in the External
port range field.
If the service or application uses a range or ranges of ports, specify the range in the
External port range field. Specify one range by using a dash between the port numbers.
Specify multiple ranges by separating the ranges with commas.
Specify the internal port or ports by one of these methods:
• If the external and internal port or ports are identical, leave the Use the same port
range for Internal port check box selected.
• If the service or application uses a single port, enter the port number in the Internal
port range field.
• If the service or application uses a range or ranges of ports, specify the range in
the Internal port range field. Specify one range by using a dash between the port
numbers. Specify multiple ranges by separating the ranges with commas.
Either enter an IP address in the Internal IP address field or select the radio button
for an attached device that is listed in the table.
Manage Port Forwarding and Port Triggering
204