Bluetooth Module - HP G61-465sl Maintenance And Service Manual

Bluetooth module

Description
Bluetooth module
Bluetooth module cable
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Hard drive (see
c. Keyboard (see
d. Switch cover (see
e. Power button board (see
f. Display assembly (see
g. Top cover (see
Remove the Bluetooth module:
1. Disconnect the Bluetooth module cable 1 from the system board.
2. Remove the Bluetooth module 2.
Reverse this procedure to install the Bluetooth module.
Maintenance and Service Guide
"Battery" on page
"Optical drive" on page
"Hard drive" on page 4-10)
"Keyboard" on page 4-17)
"Switch cover" on page
"Power button board" on page
"Display assembly" on page
"Top cover" on page 4-30)
4-7).
4-8)
4-20)
4-22)
4-23)
Removal and replacement procedures
Spare Part Number
483113-001
4–35