Configuring The Inverter Using The External Lcd Light Button - SolarEdge 3000A-US Installation Manual

Chapter 6: User Interface
Configuring the Inverter Using the External LCD Light
Button
The LCD light button can be used for communication setup and for displaying the Error log and Warning
Log without having to open the inverter cover. There are fewer menus available when using this
configuration option; however, the functionality is the same as when using the LCD User buttons.
1
Press and hold down the LCD light button until the following message is displayed:
K e e p
f o r
t o e n t e r
R e m a i n i n g
Releasing the button displays the following menu:
O p t i m i z e r
L a n g u a g e
C o m m u n i c a t i o n
M a i n t e n a n c e
I n f o r m a t i o n
E x i t
2
Short-press to scroll down to the next menu option, and long-press to select the item. You can use
the Exit options in these menus to move up one menu level or to exit the Setup mode from the main
menu.
36
h o l d i n g
p a i r i n g ,
m e n u . . .
3 s e c
p a i r i n g
< e n g >
b u t t o n
r e l e a s e
SolarEdge Installation Guide – MAN-01-00002-1.7