Installation Equipment List - SolarEdge 3000A-US Installation Manual

Installation Equipment List

Standard tools can be used during the installation of the SolarEdge system. The following is a
recommendation of the equipment to be used:

Allen screwdriver for 1/4" or 5/16" screw types

Standard flat head screwdriver

Flat Head screwdriver for P25 screws (watchmaker's screwdriver)

Screwdriver for 3/4" metal lock nut

Electrical screwdriver (tester)

Drilling machine and bits suitable for the surface on which the inverter will be installed and for
opening the AC/DC Safety Switch knockouts

Suitable screws for attaching the inverter mounting bracket to the surface to which it will be
connected

1/4" or 5/16" screws, springs and washers for attaching the power optimizer to the racking

Wire cutters

Wire strippers

Voltmeter

DC current clamp-on meter
For installing the communication options, you may also need the following:

For Ethernet: CAT5/6 twisted pair Ethernet cable

For RS485: Four- or six-wire twisted pair
SolarEdge Installation Guide – MAN-01-00002-1.7
Chapter 1: Introducing the SolarEdge System
11