Communication Connectors; Removing The Inverter Cover - SolarEdge RESU10H Prime Series Installation Manual

62 Communication Connectors

Communication Connectors

Opening for cable size (diameter)
4.5 - 7 mm, with cut
2 - 4 mm, with cut
The communication board has the following connectors:
Standard RJ45 terminal block for Ethernet connection
USB
RS485 connector
The SolarEdge Wi-Fi antenna, ZigBee or Cellular Plug-ins can be connected to the
communication board for optional wireless connection.

Removing the Inverter Cover

To remove the inverter cover
1. Switch off the AC circuit breaker on the main distribution panel.
2. Switch off the inverter ON/OFF/P switch and wait 5 minutes for the internal
capacitors to discharge.
3. Open the Allen screws of the inverter cover and carefully pull the cover horizontally
before lowering it.
4. Open the inverter cover.
Single Phase Energy Hub Inverter with Prism Technology MAN-01-00842-1.3
2.5 - 5 mm
Figure 22: Communication board connectors
Connection type
RS485
Ethernet (CAT6)
Antenna cable for wireless
communication