Mounting The Inverter - SolarEdge RESU10H Prime Series Installation Manual

Indication
Percentage of AC
Production:
0 %
Percentage of AC
Production:
0 - 33 %
Percentage of AC
Production:
33 - 66 %
Percentage of AC
Production:
66 - 100 %

Mounting the Inverter

The inverter is supplied with a mounting bracket kit:
NOTE
Make sure the mounting surface or structure can support the weight of the
inverter.
CAUTION!
SolarEdge inverters and Power Optimizers can be installed at a minimum
distance of 50 m / 164 ft from the shoreline of an ocean or other saline
environment, as long as there are no direct salt water splashes on the inverter or
Power Optimizer.
For SolarEdge inverters installed at a distance of 200 m / 655 ft or closer to the
shoreline, special brackets purchased separately from SolarEdge and SS304
stainless screws are required.
Single Phase Energy Hub Inverter with Prism Technology MAN-01-00842-1.3
ON/
OFF/ P
Switch
Red
Position
OFF
OFF
ON (1)
OFF
OFF
Figure 8: Mounting bracket
Chapter 3: Installing the Inverter
LED Color
Green Blue
OFF OFF
ON OFF
OFF ON
ON ON
33
Comment
This indicates
power
production as
percentage of
rated peak AC
output power