Troubleshooting; Chapter 6 Troubleshooting; Power, Hardware Connections, And Leds - ZyXEL Communications WRE6605 User Manual

Ac1200 dual band wifi extender
Table of Contents

Advertisement

This chapter offers some suggestions to solve problems you might encounter. The potential problems are
divided into the following categories.

Power, Hardware Connections, and LEDs

WRE6605 Access and Login
Internet Access
Resetting the WRE6605 to Its Factory Defaults
Wireless Problems
6.1 Power, Hardware Connections, and LEDs
The WRE6605 does not turn on. None of the LEDs turn on.
Make sure the WRE6605 is plugged in to an appropriate power source. Make sure the power source is
1
turned on.
Disconnect and re-connect the WRE6605.
2
Remove the WRE6605 from the outlet. Then connect an electrical device that you know works into the
3
same power outlet. This checks the status of the power outlet.
If the problem continues, contact the vendor.
4
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
2
Disconnect and re-connect the WRE6605.
3
If the problem continues, contact the vendor.
4

Troubleshooting

WRE6605 User's Guide
37
C
H A P T E R
Section 1.5.1 on page
6
10.

Advertisement

Table of Contents
loading

Table of Contents