Table of Contents
Related Manuals for Strongway 47033
Summary of Contents for Strongway 47033
- Page 1 1000-LB. ENGINE STAND WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 47033...
-
Page 2: Intended Use
Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. -
Page 3: Important Safety Considerations
SAVE THESE INSTRUCTIONS IMPORTANT SAFETY CONSIDERATIONS USE AND CARE Do not modify the Engine Stand in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment. There are specific applications for which the Engine Stand was designed. -
Page 4: Safety Markings
SAFETY MARKINGS WARNING: Study, understand, and follow all instructions before operating this device. Do not exceed rated capacity. Use only on hard, level surfaces. Lock mounting plate rotating mechanism before applying a load. Lock the wheels/casters before working on the engine. Rotate the engine using the handle or device provided. - Page 5 * Do Not Overload Engine Stand Do not overload this Engine Stand beyond its rated capacity. Overloading this Engine Stand beyond its rated capacity can cause damage to or failure of the Engine Stand. * Always Use on Hard Level Surfaces This Engine Stand is designed only for use on hard level surfaces capable of sustaining the load.
- Page 6 ASSEMBLY Use the exploded drawing as your guide to assembly. Lay all parts and assemblies out in front of you before beginning. The following procedure is recommended: All numbers in parenthesis () refer to the index number from the parts breakdown. 1.
- Page 7 4. Attach the cross member (15) to the front leg (17) with bolt (16), washer (6), spring washer (7) and nut (8). 5. Attach the main post (9) and cross member (15) to rear leg (10) with bolt (14) and washer (7). 6.
-
Page 8: Before Use
7. Insert the head plate assembly (2) into the head plate collar of the main post (9). Then line up one fixed position hole on the head plate assembly (2) with the main post stop hole (9), and assemble them by inserting the stop pin (1). 8. -
Page 9: Operation
OPERATION 1. Use the stop pin (1) to lock the head plate assembly with the head plate collar. Using an engine hoist, suspend the engine level with the head plate assembly. 2. With the mounting arms (5) loosened, use the correct size engine bolts to attach arms to the engine. - Page 10 3. Make sure the engine is centered and level on the head plate assembly, then tighten the mounting arms to the engine first, and then tighten the mounting arms to the head assembly. 4. .Check and verify that all attaching hardware on the engine, mounting plate assembly and mounting are tight.
-
Page 11: Maintenance Instructions
MAINTENANCE INSTRUCTIONS If you use and maintain your equipment properly, it will give you many years of service. Follow the maintenance instructions carefully to keep your equipment in good working condition. Never perform any maintenance on the equipment while it is under a load. Inspection You should inspect the product for damage, wear, broken or missing parts (e.g.: pins) and that all components function before each use. -
Page 12: Assembly Diagram
ASSEMBLY DIAGRAM ENGINE BOLTS ARE NOT INCLUDED WITH ENGINE STAND. -
Page 13: Parts List
PARTS LIST Index # Description Part Number Qty. Stop Pin T23401-1 Head Plate Assembly T23401D.3 Handle T23401D-2 Bolt M12x65 GB5780-86 Mounting Arm T23401D.1 Washer 12 GB95-85 Spring Washer12 GB93-87 Nut M12 GB41-86 Main Post T23401D.2 Rear Leg T23401D.4 Rear Caster T23401D-1 Washer14 GB95-85... - Page 14 Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase.