Chapter 3: Installing The Inverter; Inverter Package Contents; Identifying The Inverter; Inverter And Dc Safety Unit Interfaces - SolarEdge SE Series Installation Manual

21 Chapter 3: Installing the Inverter

Chapter 3: Installing the Inverter

Install the inverter either before or after the modules and power optimizers have been
installed.
CAUTION!
Do not rest the connectors at the bottom of the inverter on the ground, as it
may damage them. To rest the inverter on the ground, lay it on its back.

Inverter Package Contents

One i nverter with DC Safety Unit (if applicable)
Mounting bracket kit
Quick installation guide
Warranty card
Safety instructions page
Technical Specifications page

Identifying the Inverter

Refer to the sticker on the inverter that specifies its Serial Number and its Electrical
Ratings. Provide the serial number when contacting SolarEdge support. The serial
number is also required when opening a new site in the monitoring platform.

Inverter and DC Safety Unit Interfaces

Figure 4 shows an inverter with a DC Safety Unit.
NOTE
The DC Safety Unit is applicable based on the inverter model and country of
installation.
Three Phase Inverter with SetApp Configuration PN: SEXXK-XXXXIXXXX