3DConnexion CadMouse Pro Wireless Manual page 6

Mouse Wheel
The Mouse Wheel allows for both precise click-by-click zooming in CAD applications, as well as adjustable
smart scrolling speed with inertia for fast but precise skimming of long documents or web pages.
The Mouse Wheel provides two scrolling modes:
High Speed Mode: Flick the mouse wheel once to scroll quickly across multiple pages (approximately 3 pages). Simply flick
the mouse wheel again immediately afterwards, to increase the scrolling speed.
Low Speed Mode: To smoothly scroll through a document and read it at the same time, first flick the mouse wheel once, then
rotate it (click by click) before the document stops to continue scrolling.
Move the mouse wheel by one increment in the oppositive direction to stop scrolling.
Connect your CadMouse Pro Wireless
Note: Since your CadMouse Pro Wireless is factory paired with the Universal Receiver, you must first disconnect it from your
computer before you can pair it via Bluetooth or the Keyboard Pro.
Pairing via Bluetooth :
®
Turn on the device with the power switch located on the bottom of the device. Press the mode switch button (also located on
the bottom of the device) making sure the blue light next to the Bluetooth icon is active, and press the Pairing button. Your
device should be discovered on your workstation now – select it in order to finish the pairing.
Pairing via the 3Dconnexion Keyboard Pro:
Open the 3Dconnexion Settings, select the Keyboard Pro, and click on Paired Devices. Now press Add device and follow the
instructions to connect your CadMouse Pro Wireless with your Keyboard Pro.
Charge your CadMouse Pro Wireless
When the status LED of your CadMouse Pro Wireless turns red, it has less than 10% battery power left and should be charged.
Connect your CadMouse Pro Wireless to a charging port of your computer by using the included USB cable. As long as the
CadMouse Pro Wireless is charging, the status LED will pulse green, and it will turn solid green when it is fully charged.
The CadMouse Pro Wireless can be connected via the included 3Dconnexion
Universal Receiver, the 3Dconnexion Keyboard Pro, Bluetooth , or USB cable.
®
3Dconnexion CadMouse Pro Wireless | 6