Quickstart Guide; Desktop Setup; Installation - 3DConnexion CadMouse Pro Wireless Manual

QuickStart Guide

Desktop Setup

Place your CadMouse Pro Wireless on the right side of the keyboard.

Installation

1. Connect
Connect the included 3Dconnexion Universal Receiver to your computer.
2. Turn on the CadMouse Pro Wireless
Turn on the power switch located on the bottom of your CadMouse Pro Wireless.
Note: Ensure the device is in Universal Receiver mode (LED next to the receiver icon is blue).
3. Download and install the latest software package
Make sure you have the latest 3Dconnexion software (3DxWare) installed. The latest version can be downloaded at
3dconnexion.com/drivers.
4. Register your product
Register your product after the installation to benefit from 3Dconnexion services.
3Dconnexion CadMouse Pro Wireless | 3