Display Assembly - HP 16-b0 Series Maintenance And Service Manual

Table 5-17 RJ-45 door description and part number
Description
RJ-45 door, ceramic white, RTX models
RJ-45 door, shadow black, GTX models
RJ-45 door, shadow black, RTX models
Before removing the RJ-45 door, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the solid-state drives (see
5. Remove the power connector cable (see
6. Remove the heat sink (see
7. Remove the fans (see
8. Remove the system board (see
Remove the RJ-45 door:
From the inside of the computer, insert a flat tool under the RJ-45 door (1), and then lift the door up to
▲
remove it (2).
Reverse this procedure to install the RJ-45 door.

Display assembly

To remove and disassemble the display assembly, use these procedures and illustrations.
Preparation for disassembly on page
Bottom cover on page
Battery on page 32).
Solid-state drive on page
Power connector cable on page
Heat sink on page 39).
Fans on page 41).
System board on page
31).
34).
38).
45).
Component replacement procedures
Spare part number
M62233-001
M62234-001
M75755-001
31).
53