System Board - HP 16-b0 Series Maintenance And Service Manual

Table 5-11 RGB board description and part number (continued)
Description
RGB board keyboard cable
RGB board LED cable
Before removing the RGB board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the RGB board:
1. Disconnect the three cables from the ZIF connectors on the RGB board (1).
2. Remove the two Phillips M2.0 × 2.8 screws (2) that secure the board to the computer.
3. Remove the board from the computer (3).
Reverse this procedure to install the RGB board.

System board

To remove the system board, use these procedures and illustrations.
Table 5-12 System board descriptions and part numbers
Description
System board (includes processor):
All system boards use the following part numbers:
xxxxxx-001: Non-Windows operating system
xxxxxx-601: Windows 10 operating system
(Preparation for disassembly on page
Bottom cover on page
Battery on page 32).
31).
31).
Component replacement procedures
Spare part number
M62224-001
M62225-001
Spare part number
45