Wlan Module - HP 16-b0 Series Maintenance And Service Manual

WLAN module

To remove the WLAN module, use this procedure and illustration.
Table 5-9 WLAN module descriptions and part numbers
Description
Intel Wi-Fi 6 AX201-W + Bluetooth 5 (non-vPro)
Intel Wi-Fi 6 AX210 + Bluetooth 5.2 (non-vPro)
WLAN module protective shielding
IMPORTANT:
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the left solid-state drive (see
5. Remove the heat sink (see
Remove the WLAN module:
1. Remove the plastic antenna protector from the module (1).
2. Carefully disconnect the antenna cables from the module (2).
42 Chapter 5 Removal and replacement procedures for authorized service provider parts
To prevent an unresponsive system, replace the wireless module only with a wireless module
Bottom cover on page
Battery on page
Heat sink on page
Preparation for disassembly on page
31).
32).
Solid-state drive on page
39).
Spare part number
L92724-006
M27269-006
M14330-001
31).
34).