Heat Sink - HP 16-b0 Series Maintenance And Service Manual

5. Remove the power connector cable from the computer (5).
Reverse this procedure to install the power connector cable.

Heat sink

To remove the heat sink, use this procedure and illustration.
Table 5-7 Heat sink descriptions and part numbers
Description
Heat sink, models with RTX graphics
Heat sink, models with GTX graphics
Thermal grease
Thermal gel
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the heat sink:
1. In the order indicated on the heat sink, loosen the eight captive Phillips screws (1) that secure the heat
sink to the system board.
2. Remove the noncaptive Phillips M2.0 × 5.0 screw (2) that secures the heat sink to the system board.
Preparation for disassembly on page
Bottom cover on page
Battery on page 32).
31).
Component replacement procedures
Spare part number
M62226-001
M62227-001
M57183-001
M57182-001
31).
39