2.
Press down on the module until the side retention clips snap into place (3).
Speaker, right
To remove the right speaker, use this procedure and illustration.
Table 5-5
Right speaker description and part number
Description
Speaker, right
Before removing the right speaker, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the right speaker:
1.
Remove the two Phillips M2.0 × 2.5 screws from the speaker (1).
Preparation for disassembly on page
Bottom cover on page
31).
31).
Battery on page
32).
Component replacement procedures
Spare part number
M57164-001
37