10.
If you need to remove the display/camera cable, remove the cable from the routing along the bottom of
the display rear cover (1), and then peel the cable off the inside of the display back cover (2).
Display panel cables are available as the following spare part numbers:
M08907-001: Nontouch display panels
M08906-001: Touch display panels
11.
If you need to remove the hinges from the display rear cover:
a.
Remove the Phillips M2.0 × 2.5 screw (1) from the top of each hinge.
b.
Remove the three Phillips M2.0 × 2.5 screws (2) from the bottom of each hinge.
c.
Remove the Phillips M2.0 × 3.0 screw (3) from the inside-bottom of each hinge.
d.
Remove the display hinges from the display back cover (4).
The display hinges are available as spare part number M08904-001.
Component replacement procedures
49