1.
Remove the three Phillips M2.0 × 3.0 screws (1) that secure the fan to the computer.
2.
Disconnect the fan cable from the system board (2).
3.
Remove the fan from the computer (3).
Reverse this procedure to install the fan.
Heat sink
To remove the heat sink, use these procedures and illustrations.
Table 5-10
Heat sink descriptions and part numbers
Description
Heat sink
Before removing the heat sink, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
Remove the heat sink:
1.
In the order indicated on the heat sink, remove the three Phillips M2.0 × 2.0 screws (1) that secure the
heat sink to the system board.
38
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page
27).
Battery on page
29).
Spare part number
M08944-001
27).