Fan - HP Pavilion 15 Maintenance And Service Manual

3. Remove the battery (see
4. Remove the right speaker (see
Remove the fingerprint reader:
1. Disconnect the cable from the ZIF connector on the fingerprint reader board (1).
2. Remove the Phillips M2.0 × 3.0 screw (2) that secures the fingerprint reader bracket to the computer.
3. Remove the bracket from on top of the fingerprint reader (3).
4. Remove the fingerprint reader from the computer (4).
Reverse this procedure to install the fingerprint reader.

Fan

To remove the fan, use this procedure and illustration.
Table 5-9 Fan description and part number
Description
Fan
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
Remove the fan:
Battery on page 29).
Speakers on page 35).
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 29).
27).
Component replacement procedures
Spare part number
M08945-001
27).
37