Chicago Electric 46092 Owner's Manual & Safety Instructions
Auto darkening welding helmet
Hide thumbs
Also See for 46092:
- Assembly and operating instructions manual (9 pages) ,
- Owner's manual & safety instructions (12 pages)
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20i
46092 56358
Advertisement
Related Manuals for Chicago Electric 46092
Summary of Contents for Chicago Electric 46092
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Visit our website at: http://www.harborfreight.com 46092 56358 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged.
- Page 2 Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-888-866-5797. Item 46092 56358...
- Page 3 Keep work area well lit. Do not use auto-darkening regularly only by a qualified technician. helmets in the presence of flammable gases or liquids. Item 46092 56358 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 18. Maintain labels and nameplates on the tool. These dirt contact. Do not immerse the filter in water. carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. SAVE THESE INSTRUCTIONS. Page 4 For technical questions, please call 1-888-866-5797. Item 46092 56358...
- Page 5 Shade Control Knob adjusts from #9 to #13 with a #4 resting shade, Delay Control Switch Shade Guide Chart Arc Current (Amperes) Welding Process Stick/Arc Mild Steel MIG (argon shielded) Mild Steel MIG, shielded) Aluminum MIG Flux Core Item 46092 56358 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 Sensitivity Control Knob. Figure B: Inside Helmet 4. Use the Sensitivity Control Knob to set the sensitivity between low (“LO”) and high (“HI”). Page 6 For technical questions, please call 1-888-866-5797. Item 46092 56358...
- Page 7 The ultra high performance of UV and IR Auto-Darkening filters provides to user’s eyes and face full protection against UV and IR radiation during entire welding process, even in clear state. The UV/IR protection level is up to shade 16 at all times. Item 46092 56358 For technical questions, please call 1-888-866-5797.
- Page 8 Headband is not adjusted properly Sensitivity Control Knob as necessary). (must be lowered). WARNING! TO PREVENT SERIOUS INJURY: Stop using the Helmet immediately if any of the mentioned problems cannot be corrected. Page 8 For technical questions, please call 1-888-866-5797. Item 46092 56358...
- Page 9 5. Storage temperature: -4° to 158° F. the new Lens if it comes with a film covering. c. Place the new Lens into place and snap the frame securely to hold the Lens in place. Item 46092 56358 For technical questions, please call 1-888-866-5797. Page 9...
- Page 10 Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Parts may not be interchangeable. Specify UPC number when ordering: 193175312839 792363563581 Page 10 For technical questions, please call 1-888-866-5797. Item 46092 56358...
- Page 11 Assembly Diagram Item 46092 56358 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.