• The Quick Installation Guide (QIG) can be found where you find this guide or inside the package of the product. • Specifications can be found on the product page at https://www.tp-link.com. • A TP-Link Community is provided for you to discuss our products at https://community.tp-link.com.
The Archer T2E receives Wi-Fi signals on two separate bands for all your online needs. Choose the 2.4 GHz band for browsing, email and social media, or switch to 5 GHz band for gaming and streaming. The Archer T2E can work with MU- MIMO routers, which provide simultaneous data streams, boosting throughput and efficiency.
Chapter 1 Get to Know about Your Adapter LED Status You can check the adapter’s working status by following the LED Explanation table. Indication Status The adapter has been installed. The adapter is not installed or not detected. Tips: If the LED is off, try these troubleshooting tips: 1.
Chapter Connect to a Computer This chapter introduces how to connect the adapter to your computer. Please note that images are for demonstration only.
Page 8
Chapter 2 Connect to a Computer Follow the steps below to insert the adapter into your computer: 1. Turn off the computer, unplug the power cable and remove the case panel 2. Locate an available PCI-E slot and carefully insert the adapter...
Page 9
Chapter 2 Connect to a Computer 3. Connect the antennas to the adapter 4. Replace the case panel, plug in the power cable and turn on your computer Note: If the bracket is not suitable for your computer, detach it from the adapter’s board and replace it with the low-profile bracket provided.
Chapter Use Your Adapter This chapter introduces how to install or uninstall your adapter’s Wi-Fi driver, connect to a wireless network on a Windows system. This chapter includes the following sections: • Install Driver • Join a Wireless Network • Uninstall Driver...
Page 11
Follow the steps below to set up your adapter: Insert the resource CD into your CD drive and run the Autorun.exe. Note: You can also download the latest driver from the product’s Support page at www tp-link com. Select Archer T2E and follow the instructions to continue the installation.
Page 12
The software uninstallation steps vary a bit in different systems, please follow the appropriate instructions for your Windows operating system: Windows 1. Go to Start > Apps, find the TP-Link application. 2. Click Uninstall TP-Link Archer T2E, then follow the on-screen instructions to complete the uninstallation.
• Make sure you meet the system requirements for the adapter. • Make sure you use the latest driver for your specific adapter. The latest drivers can be found at the product’s Support page at https://www.tp-link.com. • Try restarting the computer or try the adapter on a different computer.
Page 14
Product Name: AC600 Wireless Dual Band PCI Express Adapter Model Number: Archer T2E Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com...
Page 15
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Page 16
5250MHz—5350MHz(20dBm) 5470MHz—5725MHz(20dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/ EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce...
Page 17
Le présent émetteur radio (IC: 26583-T2E / Model: Archer T2E) a été approuvé par Industrie Canada pour fonctionner avec les types d’antenne énumérés ci- dessous et ayant un gain admissible maximal.
Page 18
complies with the e.i.r.p. limits specified for point-to-point and non-point-to- point operation as appropriate; and DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz. Avertissement: 1 ) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à...
Page 20
Safety Information • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. • Do not use the device where wireless devices are not allowed. Please read and follow the above safety information when operating the device.