Elkay EZ Series Installation, Care & Use Manual page 13

Buy at
Versatile Wrapper and Trim Kit Installation Instructions
Left Hand Wrapper
(High Side)
1) Remove existing wrapper
by removing the (4) screws
from bottom.
2) Screw trim piece to wrapper
with (2) screws
(provided)
3) Re-install wrapper
with (4) screws.
4) Dispose of unused
cover plate.
Left Hand Wrapper
(Low Side)
1) Remove existing wrapper
by removing the (4) screws
from bottom.
2) Clip cover plate, sliding
until plate sits flush wit
the wall.
3) Re-install
wrapper with
(4) screws.
4) Dispose of
unused trim
piece.
| 855-558-9600 | BottleFillingStations.com
Wrapper Fill
Piece Location
(Left Side High)
Page 13
Right Hand Wrapper
(Low Side)
1) Remove existing wrapper
by removing the (4) screws
from bottom.
2) Clip cover plate, sliding
until plate sits flush wit
the wall.
3) Re-install
wrapper with
(4) screws.
4) Dispose of
unused trim
piece.
Right Hand Wrapper
(High Side)
1) Remove existing wrapper
by removing the (4) screws
from bottom.
2) Screw trim piece to wrapper
with (2) screws
(provided)
3) Re-install wrapper with (4) screws.
4) Dispose of unused cover plate.
Wrapper Fill
Piece Location
(Right Side High)
1000001714 (Rev. G - 06/16)