f.
Release the tape that secures the webcam/microphone module cable (6) to the back cover.
g.
Remove the back cover.
NOTE:
The back cover is available using spare part number L14333-001 and includes the webcam/
microphone module cable and wireless antenna cables and transceivers.
13.
If it is necessary to replace the display hinges:
a.
Remove the display bezel.
b.
Remove the display panel.
c.
Remove the display back cover.
d.
Remove the four Phillips PM2.5×4.7 screws (1) that secure the hinges to the bottom cover.
e.
Release the hinges (2) by sliding them toward the inside of the computer.
Component replacement procedures
47