Table of Contents
Advertisement
Sensor board
NOTE:
The sensor board spare part kit does not include the sensor board cable. The sensor board cable is
included in the Cable Kit, spare part number L14330-001, and includes double-sided adhesive.
Description
Sensor board
Before removing the sensor board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
5.
Disconnect the battery cable from the system board (see
Remove the sensor board:
1.
Release the ZIF connector (1) to which the sensor board cable is connected, and then disconnect the sensor
board cable from the system board.
2.
Remove the sensor board (2).
Reverse this procedure to install the sensor board.
Keyboard/top cover on page
Battery on page
Spare part number
L14331-001
21).
27).
Component replacement procedures
35
Advertisement
Table of Contents
