Table of Contents
Advertisement
Speakers
Description
Speakers (include cables)
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
5.
Disconnect the battery cable from the system board (see
Remove the speakers:
1.
Disconnect the speaker cable (1) from the system board.
2.
Release the tape (2) that secures the speaker cable to the system board.
3.
Remove the three Phillips M2.0×4.1 screws (3) that secure the speakers to the bottom cover.
4.
Remove the speakers (4).
Reverse this procedure to install the speakers.
Keyboard/top cover on page
Battery on page
Spare part number
L14353-001
21).
27).
Component replacement procedures
33
Advertisement
Table of Contents
