Table of Contents
Advertisement
5.
Remove the TouchPad (6).
Reverse this procedure to install the TouchPad.
Battery
Description
2-cell, 47-WHr, 6.15-AHr, Li-ion battery (includes cable)
Before removing the battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Remove the battery:
1.
Disconnect the battery cable (1) from the system board.
2.
Remove the four Phillips M2.0×4.1 screws (2) that secure the battery to the bottom cover.
Keyboard/top cover on page
Spare part number
917725-855
21).
Component replacement procedures
27
Advertisement
Table of Contents
